Getting Your Induo™ System Ready For Use; Preparing Your Induo™ Meter - Lifescan In Duo Manual

GETTING YOUR InDuo™ SYSTEM
READY FOR USE
Preparing your InDuo™ meter
Setting the time, date and unit of measurement
Your InDuo™ meter comes with pre-set values for
the time, date, and unit of measurement. However,
you can reset these if you need to change the date
or time, or if you remove the meter battery. Since
the InDuo™ meter also gives average values
(14 days and 30 days) for your blood glucose tests
(see page 53), you may find that changing the date
and time will also alter the values for the 14-day
and 30-day averages. To set the time, date and unit
of measurement, you must first enter the setting
mode on the InDuo™ meter display.
Enter the setting mode
• Press and hold down ˛ for 3 seconds.
• The InDuo™ meter is now in the setting mode
and you are ready to change the time using the
meter display.
GETTING YOUR InDuo™ SYSTEM READY FOR USE
5