Step
5.
(Optional.) Verify the
software image settings.
Displaying and maintaining software image
settings
Execute display commands in any view.
Task
Display current software images and startup
software images.
Software upgrade configuration example
Network requirements
Use the file startup-a2105.ipe to upgrade software images for the IRF fabric in
Figure 27 Network diagram
Internet
2.2.2.2/24
TFTP server
Configuration procedure
# Configure IP addresses and routes to make sure the device and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on both the device and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
Command
display boot-loader [ slot
slot-number ]
Master
Subordinate
(Member ID = 1)
(Member ID = 2)
IRF link
IRF
1.1.1.1/24
Remarks
Verify that the current software images
are the same as the startup software
images.
Command
display boot-loader [ slot slot-number ]
96
Figure
27.