Untagged ports:
Ten-GigabitEthernet1/1/6
Viewing and managing the output from a display command
effectively
You can use the following measures in combination to filter and manage the output from a display
command:
Numbering each output line from a display command
•
Filtering the output from a display command
•
Saving the output from a display command to a file
•
To use multiple measures to view and manage the output from a display command effectively, execute the
following command in any view:
Task
View and manage the output from a
display command effectively.
For example:
# Save the running configuration to a separate file named test.txt, with each line numbered.
<Sysname> display current-configuration | by-linenum > test.txt
# Append lines including "snmp" in the running configuration to the file test.txt.
<Sysname> display current-configuration | include snmp >> test.txt
# Display the first line that begins with "user-group" in the running configuration and all the following
lines.
<HP>display current-configuration | by-linenum begin user-group
201:user-group system
202-#
203-return
// The colon (:) following a line number indicates that the line contains the string "user-group." The
hyphen (-) following a line number indicates that the line does not contain the string "user-group."
Saving the running configuration
To make your configuration survive a reboot, save the running configuration to a configuration file by
using the save command in any view. This command saves all commands that have been successfully
executed except for the one-time commands. Typical one-time commands include the display commands
used for displaying information and the reset commands used for clearing information.
For more information about the save command, see Fundamentals Command Reference.
Command
display command [ | [ by-linenum ] { begin | exclude | include }
regular-expression ] [ > filename | >> filename ]
14