Fips Compliance; Configuration Task List; Creating User Roles - HP 6125XLG Configuration Manual

For more information about AAA and SSH, see Security Configuration Guide. For more information
about user interfaces, see

FIPS compliance

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.

Configuration task list

Tasks at a glance
(Required.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Creating user roles

In addition to the predefined user roles, you can create up to 64 custom user roles for granular access
control.
To create a user role:
Step
1. Enter system view.
2. Create a user role and
enter user role view.
3. (Optional.) Configure a
description for the user
role.
"Login overview" and
Creating user roles
Configuring user role rules
Configuring feature groups
Changing resource access policies
Assigning user roles
Configuring temporary user role authorization
Command
system-view
role name role-name
description text
"Logging in to the
Remarks
N/A
By default, the system has 19 predefined
user roles: network-admin,
network-operator, level-n (where n
equals an integer in the range 0 to 15),
and security-audit. Among these user
roles, only the permissions and
description of the user roles level-0 to
level-14 are configurable.
By default, a user role has no
description.
45
CLI."