Displaying And Maintaining Configuration Files - HP 6125XLG Configuration Manual

You can delete the main, the backup, or both.
To delete a file that is set as both main and backup next-startup configuration files, you must execute both
the reset saved-configuration backup command and the reset saved-configuration main command.
Using only one of the commands removes the specified file attribute instead of deleting the file.
For example, if the reset saved-configuration backup command is executed, the backup next-startup
configuration file setting is set to NULL, but the file is still used as the main file. To delete the file, you must
also execute the reset saved-configuration main command.
Delete the next-startup configuration file if one of the following occurs:
• After you upgrade system software, the file no longer matches the new system software.
The file is corrupted or not fully compatible with the device.
•
Perform the following task in user view:
Task
Delete next-startup configuration
files.

Displaying and maintaining configuration files

Execute display commands in any view.
Task
Display information about configuration
rollback.
Display the running configuration.
Display the factory defaults.
Display the contents of the main
next-startup configuration file.
Display names of the configuration files
used at this startup and the next startup.
Display the valid configuration in the
current view.
Command
reset saved-configuration [ backup |
main ]
Command
display archive configuration
display current-configuration [ configuration [ module-name ] |
interface [ interface-type [ interface-number ] ] ]
display default-configuration
display saved-configuration
display startup
display this
90
Remarks
If neither backup nor main is
specified, this command deletes
the main next-startup
configuration file.