HP 6125XLG Configuration Manual page 125

Boot image: flash:/6125xlg-cmw710-boot-r2306.bin
Boot image version: 7.1.035, Release 2306
HP 6125XLG Blade Switch with 2 Processors
2048M bytes SDRAM
4M bytes Nor Flash Memory
512M bytes Nand Flash Memory
Config Register points to Nand Flash
# Configure an IP address and a gateway for the management Ethernet interface.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] ip address 1.1.1.1 16
[boot-m-eth0] ip gateway 1.1.1.2
# Test the connectivity between the device and the TFTP server.
<boot> ping 1.2.1.1
PING 1.2.1.1(1.2.1.1):56 data bytes
64 bytes from 1.2.1.1:seq=0 ttl=64 time=0.160 ms
64 bytes from 1.2.1.1:seq=1 ttl=64 time=0.062 ms
64 bytes from 1.2.1.1:seq=2 ttl=64 time=0.061 ms
64 bytes from 1.2.1.1:seq=3 ttl=64 time=0.065 ms
64 bytes from 1.2.1.1:seq=4 ttl=64 time=0.063 ms
--- 1.2.1.1 ping statistics ---
5 packets transmitted,5 packets received,0% packet loss
round-trip min/avg/max = 0.061/0.082/0.160 ms
# Download the file system.bin from the TFTP server.
<boot> tftp 1.2.1.1 get system.bin flash:/system.bin
# Check whether the version of system.bin matches that of boot.bin.
<boot> display install package flash:/system.bin
flash:/system.bin
[Package]
Vendor: HP
Product: 6125XLG
Service name: system
Platform version: 7.1.035
Product version: Release 2306
Supported board: mpu
[Component]
Component: system
Description: system package
# Load the system image to start the Comware system.
<boot> install load flash:/system.bin
Check package flash:/system.bin ...
Extracting package ...
Loading...
118