Configuring The Information Center; Overview - HP 6125G Configuration Manual

Configuring the information center

This chapter describes how to configure the information center.

Overview

The information center collects and classifies system information as follows:
Receives system information including log, trap, and debugging information from source modules.
•
• Outputs the information to different information channels, according to output rules.
Outputs information to different destinations, based on channel-to-destination associations.
•
Information center assigns log, trap, and debugging information to 10 information channels according
to eight severity levels and then outputs the information to different destinations. The following describes
the working process in detail.
Figure 17 Information center diagram (default)
By default, the information center is enabled. It affects system performance to some degree when it is
processing large amounts of information. If the system resources are insufficient, disable the information
center to save resources.
34