Debugging A Feature Module - HP 6125G Configuration Manual

Figure 3 Relationship between the protocol and screen output switch

Debugging a feature module

Output of debugging commands is memory intensive. To guarantee system performance, enable
debugging only for modules that are in an exceptional condition. When debugging is complete, use the
undo debugging all command to disable all the debugging functions.
Configure the debugging, terminal debugging, and terminal monitor commands before you can display
detailed debugging information on the terminal. For more information about the terminal debugging
and terminal monitor commands, see Network Management and Monitoring Command Reference.
To debug a feature module and display the debugging information on a terminal:
Step
1. Enable the terminal
monitoring of system
information.
2. Enable the terminal display of
debugging information.
3. Enable debugging for a
specified module.
4. Display the enabled
debugging functions.
Command
terminal monitor
terminal debugging
debugging { all [ timeout time ] |
module-name [ option ] }
display debugging [ interface
interface-type interface-number ]
[ module-name ] [ | { begin |
exclude | include }
regular-expression ]
6
Remarks
Optional.
The terminal monitoring on the
console is enabled by default and
the terminal monitoring on the
monitoring terminal is disabled by
default.
Available in user view.
Disabled by default.
Available in user view.
Disabled by default.
Available in user view.
Optional.
Available in any view.