Configuring Threshold Monitoring; Configuration Prerequisites; Configuration Guidelines; Configuration Procedure - HP 6125G Configuration Manual

Configuring threshold monitoring

Configuration prerequisites

Before you configure threshold monitoring, complete the following tasks:
Configure the destination address of the trap message by using the snmp-agent target-host
•
command. For more information about the snmp-agent target-host command, see Network
Management and Monitoring Command Reference.
• Create an NQA test group and configure the related parameters.

Configuration guidelines

Follow these guidelines when you configure threshold monitoring:
NQA DNS tests do not support the action of sending trap messages. The action to be triggered in
•
DNS tests can only be the default one, none.
Only the test-complete keyword is supported for the reaction trap command in a voice test.
•

Configuration procedure

To configure threshold monitoring:
Step
1. Enter system
view.
2. Enter NQA test
group view.
3. Enter test type
view of the test
group.
Command
system-view
nqa entry admin-name operation-tag
type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp
| udp-echo | udp-jitter | voice }
113
Remarks
N/A
N/A
N/A