Interrupt Copy - Kyocera TASKalfa 6501i Operation Manual

6501i/8001i operation guide

Hide thumbs Also See for TASKalfa 6501i:

Table of Contents

Operation on the Machine > Copying

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.

When the interruption copy ends, the machine resumes the paused print jobs.

• If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and

printing resumes.

You can change the delay until interrupt copying is canceled. Change the delay as required.

Interrupt Clear Timer (page 8-55)

• The interrupt copy function may be unavailable depending on the status of 4,000-Sheet Finisher usage. In this case,

try the priority override.

Priority Override (page 6-54)

Configure the settings.

Press the [Interrupt] key.

The current print job is temporarily interrupted.

Place the originals onto the machine for interrupt copy, and configure the copy settings.

Press the [Start] key.

Interrupt copying begins.

When interrupt copying ends, press the [Interrupt] key.

The machine resumes the paused print jobs.

Place original.

Image Quality

Show Quick Links

Table of Contents

Taskalfa 8001i