Replacing Staples - Kyocera TASKalfa 6501i Operation Manual

Troubleshooting > Regular Maintenance

Replacing Staples

A staple cartridge is installed in the optional 4,000-Sheet Finisher, and center-fold unit.
The 4,000-Sheet Finisher contains staple cartridge holder A.
The optional folding unit contains staple cartridge holders B and C. The refill procedure for staple cartridge holders B
and C are the same as for staple cartridge holder A.
If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished with
staples.
NOTE
If the Staple Unit runs out of staples, contact your service representative or the place of purchase.
Follow the steps below to refill staples.
Refilling Staple Cartridge Holder A
NOTE
See page 10-12 to refill staple cartridge holder B/C of the optional folding unit.
1
2
2
1
1
NOTE
The staple cartridge can only be removed when it contains no more staples.
10-11