Kyocera TASKalfa 6501i Operation Manual page 506

Appendix > Optional Equipment
(1) MT-730 "Mailbox"
Makes it easy to sort output into separate trays. Installing this option adds 7 output trays. When multiple computer users
share the printer, each user can print to a specified tray. Installs on the 4,000-Sheet Finisher.
1
NOTE
To deliver output to the mail box, change the Paper Output selection on the operation panel or in the printer driver, or
change in the default settings. (For details, refer to
(2) DF-790 "4,000-Sheet Finisher"
This is a large-capacity 4,000-Sheet Finisher capable of holding large print runs and of separating and offsetting multiple
copies of a printout into individual copies. It can also staple or hole-punch (optional) the offset printouts.
User can select manual staple by operation button. A mail box and folding unit are also available as options.
(3) PH-7A, PH-7C, PH-7D "Hole Punch Unit"
Attaches to the 4,000-Sheet Finisher and is used to punch holes.
(4) BF-730 "Folding Unit"
Folds printed output at the center or in tri-fold to enable the creation of simple booklets. Installs on the 4,000-Sheet
Finisher.
(5) Copy tray(D) "Copy tray"
These are attached to the left side of the machine when the optional 4,000-Sheet Finisher is not used. There are two
trays: the Upper Left Tray and the Lower Left Tray.
(6) Banner Guide(A) "Banner Tray"
This tray enables continuous feeding of banner paper. Up to 10 sheets of banner paper can be loaded. To attach the tray
and load paper, refer to
(7) PF-770 "Side Feeder (3,000-sheet)"
In addition to the printer's cassettes, you can also install an optional side feeder (3,000-sheet) capable of holding up to
3,000 sheets of A4, B5 or Letter paper. Refer to
(8) PF-780 + PF-730 "Side Feeder (500-sheet x 3)"
PF-780 "Multimedia Side Tray (500-sheets)"
Same type of cassette as Cassette 1 on the machine, and is attached to the Paper Feeder (500-sheet x 2) or Large
Capacity Feeder (1,500-sheet x 2).
PF-730 "Paper Feeder (500-sheet x 2)"
Two additional cassettes identical to the printer's cassette can be installed in the printer. Paper capacity and loading
method are the same as the standard cassettes. Refer to
730), and Cassette 7 (PF-730) on page 3-18
Using the Banner Tray (Option) on page
for loading paper.
Paper Output on page
4-10.
Side Feeder (3,000-sheet) (Option) on page 3-25
Cassette 1, Cassette 2, Cassette 5 (PF-780), Cassette 6 (PF-
11-4
6-21.)
for loading paper.