Grandstream Networks GXP1450 User Manual page 54
Sip enterprise phones
Hide thumbs
Also See for GXP1450:
- User manual (80 pages) ,
- Quick start manual (24 pages) ,
- Technical specifications (2 pages)
Table of Contents
Advertisement
STUN Server
Firmware Upgrade and
Provisioning
XML Config File Password
HTTP/HTTPS User Name
HTTP/HTTPS Password
Upgrade Via
Firmware Server Path
Config Server Path
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Allow DHCP Option 43 and
Option 66 Override Server
Automatic Upgrade
Authenticate Conf File
Enable TR-069
ACS URL
FIRMWARE VERSION 1.0.4.23
The IP address or Domain name of the STUN server. STUN resolution
results are displayed in the STATUS page of the Web GUI. Only
non-symmetric NAT routers work with STUN.
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check.
The password for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML
configuration file.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Defines the server path for the firmware server. It could be different from
the configuration server for provisioning.
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and
flashed into the phone.
Enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted postfix will be downloaded and
flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded
and flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded
and flashed into the phone.
If DHCP option 66 is enabled on the LAN side, the TFTP server can be
redirected. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Authenticates configuration file before acceptance. The default setting is
"No".
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL
Page 54 of 69
Advertisement
Table of Contents
