Grandstream Networks GXP1450 User Manual page 51

Enable Weather Update
City Code
Update Interval
Degree Unit
Enable Stock Update
Stock Code
Enable Currency Update
Currency Code
LCD Backlight Brightness
LCD Contrast
FIRMWARE VERSION 1.0.4.23
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Greenwich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
rd
3 Tuesday...)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Specifies the degree unit for the weather information to display on the
phone.
Configures to enable or disable stock update on the phone (Not
applicable to GXP1450). The default setting is "Yes". If set to "No", the
stock information screen will not show.
Configures stock code for the phone to look up and display the stock
information (Not applicable to GXP1450).
Configures to enable or disable currency update on the phone (Not
applicable to GXP1450). The default setting is "Yes". If set to "No", the
currency information screen will not show.
Configures currency code for the phone to look up and display the
currency information (Not applicable to GXP1450).
Configures the LCD backlight brightness level (from 0 to 8) for phone's
idle status and active status. The default value is 6 for active status and
2 for idle status.
Configures the LCD contrast level (from 0 to 20). The default value is 10.
GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 51 of 69