Grandstream Networks GXP1450 User Manual page 28

 Select 1 LINE key and press to resume the 2-way conversation;
 If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;
•
End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP2120/GXP2110/GXP2100/GXP1450 supports Easy Conference Mode, which can be used combined
with the traditional way to establish the conference.
•
Initiate a conference call.
 Establish 1 call;
 Press CONF key and a new line will be brought up using the same account;
 Dial the number and press SEND key to establish the second call;
 Press CONF key or press the ConfCall softkey to establish the conference.
•
Join more parties in established conference call.
 Establish conference call;
 Press CONF key and a new line will be brought up using the same account;
 Dial the number and press SEND key to establish the second call;
 Press CONF key or press the ConfCall softkey to join the new party in the established conference.
•
Split and Re-conference.
 During the conference, press HOLD key. The conference call will be split and both calls will be put
on hold separately with 2 LINE keys blinking in green;
 Select 1 LINE key and press to resume the 2-way conversation;
 If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
•
Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key;
 This will end the second call and the screen will show the first call on hold.
FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 28 of 69