Table of Contents
Advertisement
Fitting the roof connection and profile rails
5.8
Installing profile rails
The profile rails must be joined together using rail con-
nectors. Each collector has been provided with an upper
and lower profile rail.
5.8.1 Connecting profile rails
B Push rail connector (Fig. 31, Item 1) as far as it will
go into both profile rails (Fig. 31, Item 2).
B To lock, tighten both fitted M10 threaded studs
(Fig. 31, Item 3) in the rail connector using a
size 5 Allen key.
5.8.2 Installing profile rails
B Push sliding nut (Fig. 32, Item 1) onto the roof hook
in the direction of the arrow.
B Place the lower profile rails (Fig. 32, Item 2) onto the
roof hooks and loosely fasten M8 bolt (Fig. 32,
Item 3) so that the profile rails can still be aligned.
B Carry out the same procedure for the upper profile
rails.
i
USER NOTE
Care should be taken not to over-tighten
the stud in the rail connector to avoid
deforming the material.
26
3
Fig. 31 Connecting profile rails
Item 1: Rail connector
Item 2: Profile rail
Item 3: M10 threaded stud
3
Fig. 32 Fastening profile rails to the roof hook
Item 1: Sliding nut
Item 2: Profile rail
Item 3: Bolt
1
2
63043965.33-1.SD
63043965.33-1.SD
1
2
63043965.34-1.SD
63043965.34-1.SD
6 720 613 055 (2006/04)
Advertisement
Table of Contents
