GE Profile PT925 Technical Service Manual page 20

Special Features of the Oven Control
The special feature modes can only be activated while the display is showing the time of day. They remain in
the control's memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads
at the same time. The lower oven BROIL HI/LO and BAKE pads will not activate special features. When the
display shows your choice, touch the START pad. The special features will remain in memory after a power
failure, except for the Sabbath feature, which will have to be reset.
_________________________________________________________________________________________
+
4. Using the number pads, enter the time of day you want the clean
cycle to start.
5. Touch the START pad.
The upper and lower oven doors lock automatically. The display will show
the start time. It will not be possible to open the oven doors until the
temperature drops below the lock temperature and LOCKED goes off in
the control display.
When LOCKED goes off, you will be able to open the doors.
Help Function
Touch the HELP pad to get additional information on the keypad of your
choice.
Touch the HELP pad and the display will show "Press keypad for help on
that feature or 1 for options."
The following options can be adjusted using the method described here or
through HELP.
12-Hour Shutdown
With this feature, should you forget and leave the oven on, the control will
automatically turn off the oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn off this feature, follow the steps below.
1. Touch the upper oven
until the display shows "SF".
2. Touch the DELAY START pad until "no shdn" (no shut-off) appears in
the display.
3. Touch the START pad to activate the no shut-off and leave the control
set in this special features mode.
– 20 –
BROIL HI/LO and BAKE pads at the same time
(Continued next page)