Download Print this page

GE Profile PT920SMSS Dimensions And Installation Information

30" built-in single convection wall oven
Hide thumbs Also See for Profile PT920SMSS:

Advertisement

Cutout width
PT920SM
28-1/2'' MIN.
28-5/8'' MAX.
GE Profile
30" Built-In Single Convection Wall Oven
Dimensions and Installation Information (in inches)
23-1/2'' MIN.
Cutout depth
KW Rating
240V
4.5
A
208V
3.4
B
Breaker Size
240V
20 Amps
27-1/4'' MIN.
Conduit
208V
20 Amps
27-5/16'' MAX.
(72"
long)
Cutout height
Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable
installations. Cabinets installed adjacent to wall
ovens must have an adhesion spec of at least a 194°F
Recommended
temperature rating.
cutout location
Door handle protrudes 3" from door face. Cabinets and
32-1/2"
drawers on adjacent 45° and 90° walls should be placed
from floor
to avoid interference with the handle.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired
30
in accordance with installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
Side-by-side installations require at least 2"
between cutouts.
For answers to your Monogram,
®
GE
appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
800.626.2000.
5
Junction
box
location
22'' MIN.
Suitable
bracing
to support
runners
GE Profile
or
service,
®
C L
2 x 4 or
equivalent
runners
21-5/8"
C
over centerline
of cabinet
(must support 275 lbs.)
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
29-3/4
A
Conduit
(72"
long)
21
30
Specification Revised 11/09
5
23-1/2'' MIN.
Cutout depth
Junction
box
location
B
22'' MIN.
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
Suita
brac
to supp
runn
Recommended
cutout location
32-1/2"
from floor
Listed by
Underwriters
Laboratories
220239

Advertisement

loading

Summary of Contents for GE Profile PT920SMSS

  • Page 1 Allow minimum of 21'' for clearance to adjacent corners, drawers, walls, or etc. A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim.
  • Page 2 Optional Undercounter Dimensions and Installation Information Note: 36” ribbon cooktops are approved for use over GE 30” single wall ovens only. 30” ribbon cooktops are approved for use over GE 30” and GE 27” single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data.
  • Page 3 PT920SM GE Profile 30" Built-In Single Convection Wall Oven ™ Features and Benefits • G lass Touch Controls - Features a smooth glass design that is easy-to- operate and easy-to-clean • P reciseAir Convection System - Delivers even air and heat circulation for ™ superior baking and roasting results • F lat Back Convection - Features a more streamline convection fan that better...

This manual is also suitable for:

Profile pt920sm