GE Profile PT925SNSS Dimensions And Installation Information

Cutout width
PT925SN
28-1/2'' MIN.
28-5/8'' MAX.
GE Profile 30" Built-In Single/Double Convection Wall Oven
™
Dimensions and Installation Information (in inches)
23-1/2'' MIN.
Cutout depth
KW Rating
240V
3.9
A
208V 2.9
B
Breaker Size
240V 20 Amps
27-1/4'' MIN.
Conduit
208V 20 Amps
27-5/16'' MAX.
(72"
long)
Cutout height
Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
Recommended
spec of at least a 194°F temperature rating.
cutout location
Door handle protrudes 3" from door face. Cabinets
32-1/2"
and drawers on adjacent 45° and 90° walls should
from floor
be placed to avoid interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
30
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Side-by-side installations require at least 2"
between cutouts.
For answers to your Monogram,
®
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
®
800.626.2000.
5
Junction
box
location
22'' MIN.
Suitable
bracing
to support
runners
GE Profile or
™
service,
C L
2 x 4 or
equivalent
runners
Allow 11/16"
(1.75 cm) for
ALLOW 11/16" FOR
overlap of oven
OVERLAP OF THE
over side edges
OVEN OVER SIDE
of cutout
EDGES OF CUTOUT
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
15"
(38.1 cm)
21"
Allow a minimum
ALLOW A MINIMUM
of 15" (38.1 cm) for
F 21" FOR CLEARANCE
clearance to adjacent ADJACENT CORNERS,
R AWERS, WALLS ETC.
corners, drawers,
N THE DOOR IS OPENED.
walls, etc. when
door is open
Cutout
Width
CUTOUT
28 1/2"
WIDTH
28 1/2" MIN.
(72.4 cm)
28 5/8" MAX.
Min.
28 5/8"
(72.7 cm)
Max.
Opening
Cutout
Between
Height
THE OPENING
Inside Walls
27 1/4"
BETWEEN INSIDE
CUTOUT
Must Be
(69.2 cm) Min.
WALLS MUST
HEIGHT
At Least
BE AT LEAST 27 5/16"
27 1/4" MIN.
28 1/2"WIDE
(69.4 cm) Max.
28 1/2"
27 5/16" MAX.
(72.4 cm)
Wide
Recommended
RECOMMENDED
Allow 1" (2.5 cm) cutout
CUTOUT
minimum for location from LOCATION
ALLOW 1" FOR
32 1/2"
overlap of oven OVERLAP floor 26 1/2"
FROM THE
ON OVEN TOP
top and 1 1/4" (67.3 cm) max
FLOOR
AND BOTTOM
(3.2 cm) overlap
OF CUTOUT
of oven bottom
of cutout
Cabinet
CABINET
Width
WIDTH
30"
30"
(76.2 cm)
Dimension and installation information are shown in inches.
Specification Revised 4/09
9 1/2"
(12.7 cm)
Junction Box
Max.
Location
5"
(junction box
may be
located in
adjacent
JUNCTION B
LOCATIO N
cabinet)
22" (55.9 cm)
22" TO
Min. to
BOTTOM OF
Bottom of
JUNCTION BOX
Junction Box
Listed by
Underwriters
Laboratories
220245