Select the desired position using the
NOTE: Port setting on DVR and client viewer software must be matched.
4.6.1.7 Dynamic IP Server
At the NETWORK menu, move the cursor to the DHCP using the
Select "ON" using the
Move the cursor to the DYNAMIC IP SERVER using the
Input the dynamic server IP using the
cursor.
4.6.1.8 Backup IP Server
At the NETWORK menu, move the cursor to the DHCP using the
Select "ON" using the
Move the cursor to the BACKUP IP SERVER using the
Input the backup server IP using the
cursor.
4.6.1.9 Network Frame
At the NETWORK menu, move the cursor to the NETWORK LIVE IMAGE SIZE using the
Select the desired value using the
network client viewer.
4.6.2
RS485
At the LINK menu, move the cursor to the RS485 using the
Press the ENTER button when the cursor is on the RS485 and the following screen appears.
◀,▶
buttons and set the data value using the
buttons.
buttons to change the value and the
buttons.
buttons to change the value and the
buttons to select an image size to be transported from DVR to the
▲,▼
buttons.
▲,▼
buttons.
▲,▼
buttons.
▲,▼
buttons.
▲,▼
▲,▼
buttons.
34
buttons .
▲,▼
buttons to move the
buttons to move the
▲,▼
buttons.