4.4.1.2 Sensitivity
At the MOTION DETECTION menu, move the cursor to SENSITIVITY using
Select the sensitivity level using the
SENSITIVITY: The higher the number, the more sensitive. 1(lowest) ~ 5(highest)
4.4.1.3 Area Setup
At the MOTION DETECTION menu, move the cursor to AREA SETUP using
Press the ENTER button to set the motion detection area.
Select the motion detection area using the
area.
To exit this AREA SETUP, press the ESC button.
AREA SETUP GRID: 30 x 24
4.4.1.4 Test Motion
At the MOTION DETECTION menu, move the cursor to TEST MOTION using the
Press the ENTER button to test the motion detection.
To exit this TEST MOTION, press the ESC button.
4.4.2
Event Screen Mode
At the EVENT menu, move the cursor to the EVENT SCREEN MODE using
Select the EVENT SCREEN MODE using the
SCREEN HOLD: Holds the current screen even if the event occurs.
EVENT FULL: Display the full screen of the channel which the event occurs.
EVENT MULTI: Display the multi-screen when the event occurs.
EVENT F_RTN: Display the full screen of the channel which the event occurs and return.
EVENT M_RTN: Display the multi-screen when the event occurs and return.
NOTE: If you want to use this function, you have to set EVENT setting of each channel of
RECORD PROGRAM by "O(ON)".
4.4.3
Event Check
At the EVENT menu, move the cursor to the EVENT CHECK using
Select "ON" or "OFF" using the
buttons.
◀,▶
▲,▼,
buttons and then press the ENTER button to save the
button.
buttons.
23
▲,▼
buttons.
▲,▼
buttons.
▲,▼
▲,▼
buttons.
▲,▼
buttons.
buttons.