Record Program; Preview Quality - Speco DVRM42 User Manual

Move the cursor to choose the desired time using the ▲,▼,◀, ▶ buttons.
Select the desired program among PROGRAM 0~9 using the
Press the ESC button to exit this RECORD SETUP menu or press the ENTER button to enter
the RECORD PROGRAM menu.
4.3.2

Record Program

This feature uses predefined recording modes to create new ones according to your own needs. This means
you can create different programs modes using the existing pre-defined programs. You can have up to 10
different programs (0-9). These programs will be used to setup the recording schedule on the RECORD
SETUP menu. For example, you can create a program for Motion detection or continuous recoding.
At the RECORD menu, move the cursor to the RECORD PROGRAM using ▲,▼ buttons.
Press the ENTER button when the cursor is on the RECORD PROGRAM and the following screen appears.
◀ ,▶
▲ ,▼
Use the ,
Select the desired value for each selected item using the
After all settings are done, exit using the „ESC‟ key.
When exiting from this menu, the DVR computes the values under this menu. If some mistakes exist the
DVR will display an error message and will return to this menu again. If a „0‟ FPS value is detected out of
the settings, the DVR will show a warning message and then exit.
4.3.3

Preview Quality

At the RECORD menu,
Move the cursor to the PREVIEW using
Press the ENTER button when the cursor is on the PREVIEW QUALITY and the following screen appears.
buttons to move the cursor to the desired item.
▲,▼
buttons.
button.
buttons.
20