1. Manuals
  2. Brands
  3. Speco Manuals
  4. DVR
  5. DVR-X4/IP
  6. Operating instructions manual

Speco DVR-X4IP Operating Instructions Manual

Four camera dvr system
Hide thumbs Also See for DVR-X4IP:
Table of Contents

Advertisement

Quick Links

Download this manual
DVR-X4/IP

Operating Instructions

Four Camera DVR System
SPECO TECHNOLOGIES
200 New Highway
Amityville. NY 11701
Tel. 631-957-8700
Fax. 631-957-9142
www.specotech.com
1

Advertisement

Table of Contents
loading

Related Manuals for Speco DVR-X4IP

Summary of Contents for Speco DVR-X4IP

  • Page 1: Operating Instructions

    DVR-X4/IP Operating Instructions Four Camera DVR System SPECO TECHNOLOGIES 200 New Highway Amityville. NY 11701 Tel. 631-957-8700 Fax. 631-957-9142 www.specotech.com...
  • Page 2 Digital Video Recorder 4 Channel Digital Video Recorder The Factory Default Password is: ADMIN (Administrator): 1 Please refer to page 14 of this manual for “Operation and Setup” Do not change the password before reading this entire manual.
  • Page 3 SAFETY PRECAUTIONS CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This label may appear on the bottom of the unit due to space limitations. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “...
  • Page 4 Power Disconnect. Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source ; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all unites.

  • Page 5: Table Of Contents

    1.Before reading this document………………………………………… 5 2.Unit Description………………………………………………………… 6 Front Panel…………………………………………………………… Rear Panel……………………………………………………………… 7 Controller……………………………………………………………… 8 3.Installation……………………………………………………………… 9 4.Operation………………………………………………………………… 13 Log-in ………………………………………………………………… Record ………………………………………………………………… Play …………………………………………………………………… Setting ……………………………………………………………… 5.HDD Bay………………………………………………………………… 6.Specification & Configuration……………………………………...

  • Page 6: Before Reading This Document

    Strong recommendation on installation of the DVR unit 1. Check electricity at the place you want to install the DVR unit. Make sure it is stable and meets our electricity requirements. Unstable electricity will cause malfunction of the unit or cause critical damage to the unit.

  • Page 7: Unit Description

    2. Unit Description 1. Front Panel ※If the Input window is covered, the remote controller may not work If several buttons are simultaneously or incorrectly pressed, the system may not function properly. 1.CH1:Camera 1 In Full Screen. 2.CH2:Camera 2 In Full Screen. 3.

  • Page 8: Rear Panel

    2. Rear Panel 1. RS232 Connection 2. Sensor Input/Output and RS-485 output. 3.TCP/IP Connect 4. Camera Connections with Loop out. 5.BNC Out to monitor 6.S-Video 7.DC Power 8.Fan ※ When connecting with other applications or equipment, be sure to turn off the system.

  • Page 9: Controller

    3.Controller 1. 1:Camera 1 In Full Screen. 2. 2:Camera 2 In Full Screen. 3. 3:Camera 3 In Full Screen. 4. 4:Camera 14In Full Screen. 5.QUAD:Changes to quarterly split screen or Full display screen. 6.PIP/MARK:Assigns PIP(Picture in picture)or MARK IMAGE to protect selected image from being overwritten.

  • Page 10: Installation

    3.Installation Procedure 1.Camera Connection Connect the camera to the CAMERA INPUT on the Rear Panel of the system. LOOP 2. Monitor Connection (Composite Connection Method) Connect the monitor to the MONITOR OUT on the Rear Panel of the system LOOP LENS MONITOR Rear part of CAMERA...

  • Page 11: Sensor Connection

    3. Monitor (S-VHS) Connection Connect S-VIDEO Monitor to MONITOR OUT(S-VHS) on the Rear Panel of the system. LOOP 4.Sensor Connection Connect the Sensor to the SENSOR INPUT/OUTPUT on the Rear Panel of the system RELAY ALARM (1)Relay output : COM+NC, COM+NO OR COM+NC+NO (2)Alarm input : Short-circuit between Alarm1, Alarm2, Alarm3 or Alarm4 and GND is recognized as alarm.
  • Page 12 (1)Please make it sure to leave HDD cable as folded up small (tied up) (2)when you connect single HDD to I/O Board of DVR unit, and place port 1 at connector of I/O Board and connect HDD to port 3 as shown above picture.
  • Page 13 7.Power Connection Connect the power to the POWER CONNECTION on the Rear Panel of the system, system will work. DC 12V...

  • Page 14: Operation

    1. Log-in 1.Power “ON” the unit. Press MENU button to enter the system menu. 2.LOGIN DVR SYSTEM window appears. 3.Use 1.2.3.4 button to enter password that has 1 to 8 numbers. Factory Default password is: “1” Press MENU again to enter Setup features 4.

  • Page 15: Record

    2. Record 1. PLAY Changes to Playback Mode from Recording. 2. MODE When MODE button is pressed, the full screen of each channel and quarterly split screen is played by turns. With 1.2.3.4 button, select full screen of each camera. Indicates recording speed...
  • Page 16 (4)With Play/Enter button, select ON/OFF. (5)Press PIP button to come back to recording screen 1. Indic ates addres s of c amera 001~255 3. Set ON/OFF 2. Select for s elec ted Command c ommand FOCUS FAR FOCUS NEAR FOCUS AUTO 2002 / APR / 01 PM 01:00:00 60FPS REC...
  • Page 17 4. PICTURE IN PICTURE (PIP) (1) Use1.2.3.4button to select a camera and set a full screen. PIP is not available in quarterly split screen. (2) Press PIP/MARK button. (3) With button, select the camera channel in full screen, and with 1.2.3.4 button, select the channel of smaller screen.
  • Page 18 5. FRZ (1)Live full screen pauses when FRZ button is pressed. (2) To pause quarterly split screen, press select channel. On the right of the camera name, FRZ§ message appears and the LIVE screen of that channel will pause. When pressed once more, it will come back to LIVE screen.
  • Page 19 6.SEQ (1)In LIVE full screen, press SEQ/SPEED button to make picture from each channel rotate. (2) It does not operate in quarterly split screen. (3) During automatic rotation, press SEQ/SPEED button to stop automatic rotation. (4) During automatic rotation, press QUAD button to stop automatic rotation and move to quarterly split screen.

  • Page 20: Play

    3. Play 1. Playback setup (1) Press Play/Enter button to begin playback. (2) Display screen as shown on the right will appear (3) Press Play/Enter button again to start playback from START picture. (4) To come back to recording mode. press Play button. START GOTO 2.
  • Page 21 During playback or setting GO TO time, recording is stopped When value that is out of the range of start and end is entered, it starts from START time When value is in the range of START and END, but there is no recorded pictures at the set time, it moves to the closest time of the recorded pictures.
  • Page 22 It is not a critical error in the operation of the DVR unit. Recorded data is still present. To view pictures you could not see, just go back for the same time period and replay at a slower speed.

  • Page 23: Setting

    4.Setting 1. Basic Operation (1) Press MENU button. (2) Log into the system by entering the password with 1.2.3.4 button and press MENUbutton to enter SETUP MENU. (3) Use button to select setup item. (4) Press PLAY/ENTER button to enter sub-menu of selected SETUP. (5) Press sub-menu item with (6) Press PLAY/ENTER button to forward MENUbutton to go backward.
  • Page 24 CAMERA TITLE : Camera TITLE PB TIME/DATE : On Playback screen, PB CAMERA TITLE : Camera TITLE SCREEN. DVR STATUS : indicates DVR condition, such as REC/REPLAY. BORDER SET :Changes the color of the border - WHITE/ BLACK SEQUENCE INTERVAL : With 2002/ARP12...

  • Page 25: Camera Setup

    We recommend you adjust each element of COLOR SETUP for cameras and monitor to be connected to the DVR unit. (2) TITLE SETUP : Input TITLE of each camera button to select CHANNEL and press PLAY/ENTER button...
  • Page 26 When modification is finished, press MENU button to come back to the MAIN MENU. (3) ACTIVE CH SETUP : With button, move to item to be changed, and press PLAY/ENTER button to select ON/OFF. STATUS : In normal cable condition it is indicated as ACTIVE, and when the cable is disconnected or has problem, it is indicated as LOSS.
  • Page 27 4. TIME/DATE SETUP TIME/DATE SETUP SET TIME/DATE SET TIME/DATE TYPE SELECT , PRESS (1)SET TIME/DATE : User can set year/month/time/minute/second button to assign Year/Month/Time/Minute/Second and use button to change the value.. (2)SET TIME/DATE : HOUR DISPLAY : Changes to AM/PM or 24hour time indication DATE DISPLAY: Converts into Asian type/American type/European type MONTH DISPLAY:MONTH Indication is changed to English or Number YEAR...
  • Page 28 5. ALARM/MOTION SETUP ALARM/MOTION SETUP ALARM SETUP ALARM LIST SETUP MOTION SETUP MOTION MASK SETUP SELECT , PRESS (1)ALARM SETUP : Matches the polarity of sensors externally installed. OFF:Not in use. NC: Normal Closed. When an event happens, Contact is opened. NO: Normal Open.
  • Page 29 With button, select SORT, DELETE or GO TO. (SORT: Press PLAY/ENTER button to select submenu of SORT. Selections included are: CH ,TIME and TYPE. 1)CH: Sort by CHANNEL 2)TIME: Sort by TIME 3)TYPE: Sort by TYPE (DELETE: Press PLAY/ENTER button when DELETE is highlighted, and select MARK, PAGE or ALL using 1) MARK: Deletes marked item in the list.
  • Page 30 CHANNEL NUM : Selected camera number SENSITIVITY : Adjusts motion Detection Sensitivity. (Not Sensitive DETECT WINDOW NUM : Detects moving objects bigger than DETECT WINDOW NUM can choose from 1 to 20. If DETECT WINDOW NUM value is 5, motion detection is activated only in case 5 cells are simultaneously detected.
  • Page 31 SELECT VER LINE : Select all in a vertical line. CLEAR VER LINE : Clear all in a vertical line. SELECT HOR LINE : Select all in a horizontal line. CLEAR HOR LINE : Clear all in a horizontal line. SELECT BLOCK : Select by BLOCK.

  • Page 32: Record Setup

    (1) HDD CLEAR : If YES is selected, it deletes content of the HDD. All contents of the HDD is deleted and cannot be restored. As times go by, HDDs in a DVR unit may develop bad sectors. This DVR model compensates for bad sectors in hard disk drives.
  • Page 33 7. TCP/IP SETUP TCP/IP option of Stand-alone DVR enables user to see live pictures and recorded pictures via internet line, remotely from DVR. To see live pictures or recorded pictures of DVR, static IP address 《 users must assign a Subnet mask.

  • Page 34: Miscellaneous Setup

    8. MISCELLANEOUS SETUP (1)BUZZER SETUP : Sets different kinds of BUZZER ON/OFF. (2)ID/PW SETUP : Sets User ID and PASSWORD. SYSTEM SETUP DISPLAY SETUP CAMERA TITLE TIME/DATE SETUP ALARM/MOTION SETUP RECORD SETUP TCP/IP SETUP BUZZER SETUP MISCELLANEOUS ID/PW SETUP FACTORY DEFAULT SCHEDULE REC SETUP PANTILT CMD SETUP HDD INFORMATION...
  • Page 35 (3)SCHEDULE REC SETUP : SYSTEM SETUP DATE : Set by day DISPLAY SETUP WEEK : Set by the day CAMERA TITLE of the week TIME/DATE SETUP ALARM/MOTION SETUP RECORD SETUP BUZZER SETUP TCP/IP SETUP ID/PW SETUP MISCELLANEOUS SCHEDULE REC SETUP PANTILT CMD SETUP FACTORY DEFAULT HDD INFORMATION...
  • Page 36 Just record from 1 to 3 (When both ON and OFF are set, priority is set to ON.) (NOTE for scheduled recording) : When scheduled recording is set, DVR unit does not record before the set time. It only starts recording at START time and ends at END time.
  • Page 37 (5)HDD INFORMATION HDD DATA LIST: Shows general information of HDD. HDD AUTO DETECT: Allows unit to detect HDD. (6) MARK IMAGE SETUP (Internal backup) MARK IMAGE is a very useful function, because it protects marked images from being overwritten. During playback, you can mark images to store them on the HDD even after HDD starts to overwrite.

  • Page 38: Hdd Bay

    If each of 22 HDD is 120GB in capacity, total HDD capacity connected to a unit of DVR is 2.64 TG. We can add huge capacity of HDD storage to a unit of DVR just at the price level of normal EIDE HDD.
  • Page 39 There are two bolts on the rear of 4CH DVR, and also there are two bolts on the rear of hard disk bay. There is a male Connector under the 4CH DVR and also there is a female connector above the hard disk bay.
  • Page 41 OPERATION HUMIDITY IR REMOTE CONTROLLER ME CHANICAL DIMENSION WEIGHT POWER SUPPLY Stand alone DVR 4 CH INPUT 1.0 VP-P, 75 OHM UNBALANCED (BNC TYPE) 3 OUTPUT VBS : 1.0VP~P.75 OHM UNBALANCED (BNC TYPE) 480TV LINES MORE THAN 4dB 16.7 MILLION FULL, QUAD DISPLAY LIVE &...
  • Page 42 CONFIGURATION...
  • Page 43 . RS-232C Hex-codes table Following ASCII-codes are for programmers who want to control the DVR via RS-232C port. 1 Byte ASCII-code. MENU ‘M’ PIP/MARK PLAY ‘P’ MODE ‘D’ SEQ/SPEED ‘Q’ PANTILT ‘T’ ZOOM RS-485 Pin No. Definition RS-232 Pin No.

Table of Contents