Screen; Auto Sequence - Speco DVRM42 User Manual

4.2

SCREEN

Select SCREEN Menu by pressing the Enter button from the remote.
Select the desired item by pressing ▲,▼ button from the remote controller.
4.2.1

Auto Sequence

Move the cursor to the AUTO SEQUENCE using
Move the cursor to each single or split channel using the
When the desired channel is selected, change the value of AUTO SEQUENCE duration using the
button. This sets the length of time for switching each channel in a sequence.
The value can be set from 1 SEC to 60 SEC.
The default is 3 SEC.
VIDEO LOSS SKIP : If selected ON, every VIDEO LOSS channel will be skipped in
ADD AUTO SINGLE: If selected OFF, every single channel will be skipped in
the AUTO SEQUENCE mode. The default is "ON".
the AUTO SEQUENCE mode.
The default is "OFF".
▲,▼
buttons.
▲,▼
buttons.
14