Postscript Menu; Pcl Emul Menu - Lexmark MX410 User Manual

Understanding the printer menus
Use
Annotations
Do Not Print
Print

PostScript menu

Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk

PCL Emul menu

Use
Font Source
Resident
Download
All
Font Name
Courier 10
Symbol Set
10U PC‑8
12U PC‑850
To
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
•
Resident is the factory default setting.
•
This menu item is available only when a formatted flash memory option
card or printer hard disk is installed and operating properly.
•
Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used in the Font Name menu.
Notes:
•
"Resident" is the factory default setting. It shows the factory default set
of fonts downloaded in the RAM.
•
"Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
Identify a specific font and where it is stored.
Note: Courier 10 is the factory default setting.
Specify the symbol set for each font name.
Notes:
•
10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
•
A symbol set is a set of alphabetical and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs, such as math symbols for scientific text. Only the
supported symbol sets are shown.
197