Lexmark MX410 User Manual page 49

Additional printer setup
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe.
c
Press Enter, or click OK.
Note: D is the letter of your CD or DVD drive.
3
Click Install, and then follow the instructions on the computer screen.
4
Select Ethernet connection, and then click Continue.
5
Attach the Ethernet cable when instructed to do so.
6
Select the printer from the list, and then click Continue.
Note: If the configured printer does not appear in the list, then click Modify Search.
7
Follow the instructions on the computer screen.
For Macintosh users
1
Allow the network DHCP server to assign an IP address to the printer.
2
Obtain the printer IP address either:
•
From the printer control panel
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: You will need the IP address if you are configuring access for computers on a different subnet than the printer.
3
Install the printer driver on the computer.
a
Insert the Software and Documentation CD, and then double‑click the installer package for the printer.
b
Follow the instructions on the computer screen.
c
Select a destination, and then click Continue.
d
From the Easy Install screen, click Install.
e
Type the user password, and then click OK.
All the necessary applications are installed on the computer.
f
Click Close when installation is complete.
4
Add the printer.
•
For IP printing:
a
From the Apple menu, navigate to either of the following:
–
System Preferences > Print & Scan
–
System Preferences > Print & Fax
b
Click +.
c
Click the IP tab.
d
Type the printer IP address in the address field, and then click Add.
•
For AppleTalk printing:
Notes:
– Make sure AppleTalk is activated on your printer.
49