Lexmark MX410 User Manual page 229

Clearing jams
Notes:
•
When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the
standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.
•
When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not
guarantee that the page will reprint.
Jam access area
1 Automatic document
feeder (ADF)
2 Standard bin
3 Front door
4 Multipurpose feeder [x]‑page jam, clear manual
5 Tray 1
6 Tray [x]
7 Rear door
Printer control panel message
[x]‑page jam, open automatic
feeder top cover. [28y.xx]
[x]‑page jam, clear standard
bin. [20y.xx]
[x]‑page jam, open front
door. [20y.xx]
feeder. [250.xx]
[x]‑page jam, remove tray 1 to
clear duplex. [23y.xx]
[x]‑page jam, remove tray
[x]. [24y.xx]
[x]‑page jam, open rear
door. [20y.xx]
What to do
Remove all paper from the ADF tray, and then remove
the jammed paper.
Remove the jammed paper.
Open the front door, then remove the toner cartridge
and imaging unit, and then the jammed paper.
Remove all paper from the multipurpose feeder, and
then remove the jammed paper.
Pull out tray 1 completely, then push the front duplex
flap down, and then remove the jammed paper.
Note: You may need to open the rear door to clear
some 23y.xx paper jams.
Pull out the indicated tray, and then remove the jammed
paper.
Open the rear door, and then remove the jammed paper.
229