Alarm Mode; Turn An Alarm On Or Off - Timex T5K549 User Manual

your computer desktop.
• PC SYNC READY displays when the computer starts communicating with the watch. An error message
displays if it was unsuccessful.
• PC SYNC IN PROGRESS displays during the sync process.
2. If a workout is in progress, the computer application requests confirmation that you wish to continue with
the sync process. Select NO to end the sync process and return to Time of Day mode, or select YES to
continue.
3. If you select the blinking YES option to continue with the computer sync:
a. Another message pops up asking if you wish to save the workouts.
b. Select YES to save the workout session (Chrono/Timer/Interval Timer) with sensor information. The watch
stops currently running workouts, turns off the GPS and ANT+
process.
c. Select NO to stop the workout without saving. The watch continues the computer sync process.
4. When the computer download is complete, the PC SYNC TRANSFER COMPLETE message displays, and the
watch returns to Time of Day mode.
NOTE: Press RADIO/BACK at any time to cancel computer download and go back to Time of Day screen.

ALARM MODE

The following features are offered in Alarm mode:
• Five independent alarms with selectable frequency: daily, weekdays, weekends, once, and Sunday to
Saturday
• Customizable alarm names
• Five-minute backup alarm
• INDIGLO night-light flashes when alarm alert sounds
®

TURN AN ALARM ON OR OFF

You can turn alarms on or off from the ALARM screen.
1. Press MODE until ALARM displays.
2. Press UP to choose the alarm to turn on or off. The alarm name displays at the top.
3. Press DOWN to turn the alarm on or off. When the alarm is on, its frequency displays below the time.
NOTE: Active alarms sound at their set times. Press any button to silence an alarm.
CONFIGURE THE ALARM
1. Press MODE until ALARM displays.
2. Press SET.
3. Press UP or DOWN to select the alarm to set, and then press SELECT.
SET ALARM TIME
With an alarm selected, set the alarm time by performing the following steps:
1. Press UP to select TIME, and then press SELECT.
2. Press UP or DOWN to change the blinking value, and then press NEXT to move to the next value.
3. Press DONE.
SET ALARM FREQUENCY
With an alarm selected, set the alarm frequency by performing the following steps:
1. Press UP or DOWN to select FREQUENCY, and then press SELECT.
2. Press UP or DOWN to select a frequency, and then press SELECT.
3. Press DONE.
RENAME THE ALARM
With an alarm selected, rename the alarm by performing the following steps:
1. Press DOWN to select RENAME, and then press SELECT.
2. Press UP or DOWN to change the blinking value, and then press NEXT to move to the next value.
3. Press DONE.
Radio, and continues the computer sync
™
21