Alarm Mode; Setup Mode; Turning The Alarm On And Off - Timex Ironman SLEEK 250-LAP Full User Manual

ALARM MODE

You can set up to 3 alarms to remind you of upcoming events. You can set these alarms to sound
once, daily, weekly, on weekends, or only on specific days.
SETTING THE ALARMS
1. Press MODE until ALARM displays.
2. Press DISPLAY/TAP ON-OFF/- to choose the alarm to set.
3. Press SET.
4. Press START/SPLIT/+ and DISPLAY/TAP ON-OFF/- and to set hours, and then press
MODE.
5. Continue pressing START/SPLIT/+, DISPLAY/TAP ON-OFF/-, and MODE to set
minutes, AM/PM, and frequency.
6. Press SET to exit.

TURNING THE ALARM ON AND OFF

1. Press MODE until ALARM displays.
2. Press DISPLAY/TAP ON-OFF/- to choose the alarm to set.
3. Press START/SPLIT/+ to turn the alarm on or off.
When the d icon displays, the alarm is armed and will sound at the specified time and
frequency.

SETUP MODE

Setup mode is where all global settings for the watch are configured.
SETTING SYSTEM PREFERENCES
You can choose from several settings to determine how you interact with the SLEEK™ 250 and
how the watch collects and displays data.
 Tap force – Determines how hard you must tap the watch face to start a timer or take a
lap/split. Select from LIGHT, MEDIUM, or HARD. If you experience accidental
laps/splits if the watch is bumped, increase the tap force. You can also turn the
TapScreen™ OFF.
 Units – Choose to display measurements in IMPRL units (miles, feet, inches, pounds) or
METRIC units (kilometers, centimeters, kilograms).
 Hourly chime – When hourly chime is ON, the N icon displays, and the watch will beep
at the top of every hour.
 Button beep – Choose BEEP ON to enable a beep when you press a button on the watch
or tap the watch face. Choose BEEP OFF to disable this feature.
1. Press MODE until SETUP displays.
2. Press START/SPLIT/+ to select SYSTEM.
11