Alarm Mode; Setup Mode - Timex Ironman SLEEK 250-LAP User Manual

5. Press SET to exit.
STARTING, STOPPING, AND RESETTING THE TIMER
1. Press MODE until TIMER displays.
2. Press START to start the timer. The H icon is lit when the timer is running.
Press DISPLAY to scroll through workout data for the timer currently running. You can
view distance, elapsed time, current pace, time remaining, and current cadence.
The watch beeps when the timer has run out.
3. To stop the timer before it has run out, tap the watch face or press STOP.
4. When the timer is stopped, hold RESET to reset it.
NOTE: No workout data is saved when you reset the timer. Use Chrono or Interval Timer
mode to record data for review. See
instructions on timing Chrono or Interval Timer workouts.

ALARM MODE

You can set up to 3 alarms to remind you of upcoming events. You can set these alarms to sound
once, daily, weekly, on weekends, or only on specific days.
SETTING THE ALARMS
1. Press MODE until ALARM displays.
2. Press DISPLAY/TAP ON-OFF/- to choose the alarm to set.
3. Press SET.
4. Press START/SPLIT/+ and DISPLAY/TAP ON-OFF/- and to set hours, and then press
MODE.
5. Continue pressing START/SPLIT/+, DISPLAY/TAP ON-OFF/-, and MODE to set
minutes, AM/PM, and frequency.
6. Press SET to exit.
TURNING THE ALARM ON AND OFF
1. Press MODE until ALARM displays.
2. Press DISPLAY/TAP ON-OFF/- to choose the alarm to set.
3. Press START/SPLIT/+ to turn the alarm on or off.
When the d icon displays, the alarm is armed and will sound at the specified time and
frequency.

SETUP MODE

Setup mode is where all global settings for the watch are configured.
CHRONO MODE and INTERVAL TIMER MODE for
15