Olivetti d-Copia 300 Operation Manual page 196

Section 7 COPIER MANAGEMENT FUNCTIONS
(4) Copy default settings
The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most
effective use of your copier.
Default setting
Exposure mode Selects between auto exposure and manual
exposure as the default copy exposure mode in the
initial mode.
Exposure adjustment Changes the incremental step to be used during
step adjustment of the copy exposure.
Original quality Determines the default setting that will be used for
the image quality in the initial mode.
Eco print mode ON/OFF Determines whether the Eco print mode will be the
default setting in the initial mode. In this case, the
amount of toner that is used to make the copies will
be reduced, and images will be printed out relatively
lighter than normal.
Background exposure Adjusts the ground color of the copied paper.
adjustment
Paper selection Sets whether the copier will automatically select the
same size of copy paper as the original once an
original is set (APS: auto paper selection mode), or
whether the drawer[cassette] selected "Default
drawer" ["Default cassette"] setting will be
automatically selected.
Paper type (auto paper Sets which types of paper can be selected under the
selection mode) auto paper selection mode.
* It is possible to select the type of paper that has
7-58
Description
been designated for the drawer[cassette] currently
in use.
Available settings
Manual / Auto Manual
1 step / 0.5 step 1 step
Text+Photo / Text / Text+Photo
Photo
On / Off Off
-2 – +2 Standard setting
(0)
APS / Default APS
drawer[cassette]
Off / On Off
Plain – – –
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
High quality
Custom 1 –
Custom 8
Factory Reference
setting page
7-62
7-63
7-64
7-65
7-66
7-67
7-68