Olivetti d-Copia 300 Operation Manual page 165

● Printer function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the printer functions of this machine.
NOTE
This setting is only available when the optional Printer Kit or Printer/
Scanner Kit is installed in your copier.
1 Select "Print. Managem." under the "Setting item" column on
the left side of the touch panel and then touch the "Change #"
key.
The "Print. Managem." screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Default setting - Management code menu - Managem. Def. Set.
Metric specifications
Managem. Def. Set.
Setting item
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Default setting - Management code menu - Managem. Def. Set.
Value
On
On
On
On
All
Change #
On
Value
On
On
On
On
All
Change #
On
Section 7 COPIER MANAGEMENT FUNCTIONS
2 To turn copy management ON for the printer functions of this
machine, touch the "On" key.
Inch specifications
Print. Managem.
Printer management can be set up.
Default setting - Management code menu - Managem. Def. set.
Metric specifications
Print. managem.
Printer management can be set up.
Close
Default setting - Management code menu - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Close
3 Touch the "Close" key.
The touch panel will return to the screen in step 1.
Off
On
Off
On
Back Close
Back Close
7-27