Olivetti d-Copia 300 Operation Manual page 170

Section 7 COPIER MANAGEMENT FUNCTIONS
● Fax function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the fax functions of this machine.
NOTE
This setting is only available when the optional Fax Kit is installed in
your copier.
1 Select "Fax Management" under the "Setting item" column on
the left side of the touch panel and then touch the "Change #"
key.
The "Fax Management" screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management code menu - Managem. Def. Set.
Metric specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management code menu - Managem. Def. Set.
7-32
Value
On
On
Unable to use
999999
1
8 / x11" No specif.
2
1
8 / x11" No specif.
Change #
2
8 1 / x11" No specif.
2
Value
On
On
You cannot use
999999
A3 No specif.
B4 No specif.
Change #
A4 No specif.
2 To turn copy management ON for the fax functions of this
machine, touch the "On" key.
Inch specifications
Fax Management
Fax management can be set up.
Default setting - Management code menu - Managem. Def. set.
Metric specifications
Fax Management
Fax management can be set up.
Close
Default setting - Management code menu - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Close
3 Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
Off
On
Back
Off
On
Close
Close