Olivetti d-Copia 300 Operation Manual page 171

● Response to exceeded restriction
Perform the following procedure to determine whether further use of
the machine will be canceled or an error message will be generated
when a department ID-code has exceeded its set limit.
1 Select "Excess of limit Setting" under the "Setting item"
column on the left side of the touch panel and then touch the
"Change #" key.
The "Excess of limit Setting" screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management code menu - Managem. Def. Set.
Metric specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management code menu - Managem. Def. Set.
Value
On
On
Unable to use
999999
8 1 / x11" No specif.
2
8 1 / x11" No specif.
Change #
2
8 1 / x11" No specif.
2
Value
On
On
You cannot use
999999
A3 No specif.
B4 No specif.
Change #
A4 No specif.
Section 7 COPIER MANAGEMENT FUNCTIONS
2 To cancel further use of the machine, touch the "Is not
permitted" key. To have an error message generated, touch
the "Only warning" key.
Inch specifications
Excess of limit Setting
Selection method of limitation.
Close
Default setting - Management code menu - Managem. Def. set.
Metric specifications
Excess of limit Setting
Selection method of limitation.
Close
Default setting - Management code menu - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
3
Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
Is not
permitted
Only
warning
Back
Is not
permited
Only
warning
Close
Close
7-33