Olivetti d-Copia 300 Operation Manual page 169

● Scanner function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the scanner functions of this machine.
NOTE
This setting is only available when the optional Printer/Scanner Kit is
installed in your copier.
1 Select "Scanner Managem." under the "Setting item" column
on the left side of the touch panel and then touch the
"Change #" key.
The "Scanner Managem." screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Default setting - Management code menu - Managem. Def. Set.
Metric specifications
Managem. Def. Set.
Setting item
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Default setting - Management code menu - Managem. Def. Set.
Value
On
On
On
On
All
Change #
On
Value
On
On
On
On
All
Change #
On
Section 7 COPIER MANAGEMENT FUNCTIONS
2 To turn copy management ON for the scanner functions of
this machine, touch the "On" key.
Inch specifications
Scanner Managem.
Scanner management can be set up.
Default setting - Management code menu - Managem. Def. set.
Metric specifications
Scanner Managem.
Scanner management can be set up.
Close
Default setting - Management code menu - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Close
3 Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
Off
On
Back
Off
On
Close
Close
7-31