Table of Contents
Advertisement
CAUTION:
This remote control must only be operated
by a responsible adult who has been
instructed in, understands, and is aware of
the water heater's operating conditions.
BATTERIES REPLACEMENT
B Remove the 2 screw from the remote control back.
B Open the cover.
B Remove the old batteries and replace with new ones.
B Close the remote control assuring that both screws
are tighten screwed.
CAUTION:
Remote control damage!
B The remote control can be used in a
shower
, however do not submerged
the remote control in water
PRECAUTIONS WHEN USING THE BATTERIES
• Do not dispose of batteries as domestic waste. Take
them to appropriate collecting places for recycling.
• Do not insert flat batteries.
• Only use the type of batteries indicated.
9.10 PROGRAM BUTTON
Program button can be used in the appliance and in the
remote control.
"PROGRAM" FUNCTION
Each remote control program button can be
programed with different temperature
values according with the user needs. A
temperature value can be programmed in
the remote control and another value in the
appliance.
Fig. 63 "Program" key
B Press buttons
and
to be memorized.
6 720 646 322 (2012/05)
.
Program
6720608920-32. 1 AL
to select temperature
B Press "Program" button for 3 seconds to save
temperature.
The temperature is saved on "Program" when the LCD
panel stops blinking.
USING "PROGRAM" FUNCTION
In order to select memorized temperature:
B Press "Program" button.
LCD shows pre-memorized temperature, which is
now the selected hot water temperature.
9.11 "PRIORITY" FUNCTION
PRIORITY is a function to prevents the user
from accidentally altering the water
temperature selected by another user.
The appliance does not have a default priority.
Priority is given when the first user selects a
temperature (
chapter 5.4).
The following symbol appears for other users
The priority user may change the initial selection at any
time.
Non-priority users cannot change the selection made by
the priority user.
The system resets priority function 5 minutes after last
water demand, returning to the initial state.
TO SELECT PRIORITY
Any user may select temperature selection priority in the
following manner:
B Press one of the selection buttons
5 seconds.
Priority cannot be selected when the
appliance is working.
COMMISSIONING
.
or
for
45
Hide quick links:
Advertisement
Table of Contents
