Table of Contents
Advertisement
ELECTRICAL CONNECTION
8.6
INSTALLATION OF INTELLIGENT
CASCADING KIT
Each appliance comes equipped with two connectors
inside for the installation of the intelligent cascading kit.
The connectors are labeled 'cascading input' and
'cascading output'. To access connectors, remove front
cover ( 8.5 POSITION OF THE FUSES IN CONTROL
UNIT).
Although intelligent cascading will rotate the primary
appliance, it is essential to install the kit starting with
the appliance that is furthest from the cold water main.
B Starting with the appliance furthest from the cold
water main, connect the male end of the cascading
cable to the connector inside labeled 'cascading
output'.
3
Fig. 51 Example of installation
1
Primary appliance
2
Secondary appliance
3
Cascading Input
4
Cascading Output
34
2
2
4
B Feed the cascading cable to the left from the primary
appliance through the hole at the bottom of the
adjacent secondary appliance.
B Connect to the 'cascading input' connector of the
secondary appliance (
B Repeat this procedure for all the secondary
appliances.
B Complete the circuit by connecting a cascading cable
from the "cascading output' connector on the last
secondary appliance to the "cascading input"
connector on the primary appliance.
Cascading cables may be connected in
series if one cable is not long enough.
4
2
1
6720646273-02.1V
6 720 646 322 (2012/05)
Fig. 51).
3
Hide quick links:
Advertisement
Table of Contents
