Various Settings; Setting The Audio Mode - Denon DVD-A1UD Owner's Manual

Setting items
Initialize Cancel : Do not initialize.
All settings including audio OK : Execute initialization.
mode and picture quality are
default settings.
Firmware Update Check for Update : Check if the latest firmware exists. You can also
Update the firmware of the check approximately how long it will take to complete an update.
unit via the Internet. Start : Starts firmware update.
When updating starts, the power indicator lights red and the GUI screen
is shut down.
During update, a rough remaining time is indicated on the display.
When updating is complete the power indicator lights green and normal
status is resumed.
Information
GFont LicenseH
Displays the license for Japanese (Original) : Displays in Japanese.
the IPA font used by this
The font used in this product's GUI menu screen conforms to IPA
product. font specifications. See the following URL for the IPA font license
agreement.
http://ipafont.ipa.go.jp/enduser_license.html
Cautions on "Firmware Update"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage 21, 31).
• Do not turn off the power until updating is completed.
• Information regarding the "Firmware Update" function will be announced on the DENON web site
each time related plans are defined.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating
procedure to be completed.
Once updating starts, normal operations on the DVD-A1UD cannot be performed until updating is
completed. Also, setting items of the GUI menu of DVD-A1UD or setting items of the image adjustment
may be initialized.
Remote control operation
buttons
Other Setup
Setting contents
: Displaying the menu
Cancel the menu

Various Settings

You can set the audio mode and change playback files.
You can set various modes during playback. The setting menu is displayed at the top of the screen.
1
Press .
Displays the currently settable menu.
The display content changes depending on the media being played back.
b
2
Select the setting item using
3
Use to select a setting and use

Setting the Audio Mode

Setting items
BD Audio Mode HD Audio Output : Can view by outputting high quality signals such as
Switch BD audio playback Dolby TrueHD, Dolby Digital Plus, or DTS-HD as its high sound quality
mode. bitstream. Cannot listen to interactive or secondary audio.
Mix Audio Output : Outputs a mix of primary audio/interactive audio/
secondary audio.
In the case of Dolby TrueHD, Dolby Digital Plus and DTS-HD audio
playback, set to "HD Audio Output".
NOTE
When "Mix Audio Output" is set and DTS-HD audio signals are played,
only the DTS digital surround stream of the DTS-HD audio stream is
decoded and output.
Surround Mode Direct : Do not apply surround processing and output audio as is.
Converts a 2-channel source, DOLBY PLgx (or PLg) : Apply DOLBY PLgx (or PLg) surround processing
etc. to output multi-channel and output the signal.
surround audio. DTS NEO:6 : Apply DTS NEO:6 surround processing and output the
signal.
NOTE
• This setting is valid when "Audio Setup" – "7.1ch Audio Out" on the GUI
menu is set to "Multi Channel" and when "HDMI Setup" – "Audio Setup"
on the GUI menu is set to "Multi LPCM BM On" (vpage 25).
• This setting is invalid when "Audio Setup" – "Source Direct" on the GUI
menu is set to "On" (vpage 29), and when "DENON LINK Setup" –
"DENON LINK Mode" is set to anything other than "Off" (vpage 30).
: Moves the cursor
:Decision the setting
(Up/Down/Left/Right)
Vertical Stretch Off
BD Audio Mode Mix Audio Output
File filter All
, and then press or .
to change the setting.
Default settings are underlined.
Setting contents
:Return to previous menu
ENGLISH