ENGLISH
Connecting the Power Cord
Connect the included power cord to the DVD-A1UD, and plug it into an AC outlet.
NOTE
•
Be sure to insert the power plug firmly. Incomplete connection results in noise generation.
22
Once Connections are Completed
Turning the Power On
To household power
outlet (AC 230 V, 50 Hz)
Press the unit's
The power is turned on, and the power indicator lights green.
Power cord
"LOADING" appears on the display, and disc information is read.
(included)
The "NO DISC" message is displayed when a disc is not loaded.
b
On the GUI menu, when "Other Setup" – "Auto Power Mode" – "On" (vpage 32), the following states are
maintained for about 30 minutes, and then the power is turned automatically to standby.
•
Disc not loaded
•
Playback has stopped
•
Stopped due to resume function
When power is switched to standby
n
Either press
The power indicator lights red.
NOTE
During power standby, a slight amount of power is consumed. To totally cut off the power, remove the
power cord from the power outlet.
or the remote control's
.
on the unit, or press
on the remote control.
(Remote control
(DVD-A1UD)
unit)