Ratings Control; Rating Level; If You Forget The Password; Control Levels - Denon DVD-556 Operating Instructions Manual

Ratings Control _
Ratings Control allows you to set a limit, which prevents your
children from viewing inappropriate materials on DVDs. A four-
digit password that you establish will give you the control.
I RATING LEVEL ]
You can set a viewing limit through Rating Level. Playback of
the discs will stop if the disc's general rating exceeds the limit
you set.
Press the SETUP button in stop mode.
_Ct Press the Cursor buttons (_ or _) to select
CUSTOM, then press the ENTER button.
_'_ Press the Cursor buttons (_ or
_) to select RATINGS, then
press the ENTER button.
U Press the Numeric buttons to
enter your four-digit password.
o When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons (except for 4737), then
press the ENTER button. That number will be used as
the password from the second time onward. Record
your password in case you forget it.
• If you forget the password, press
4, 7, 3, 7. The original password
will be cleared and rating levels
will be set to ALL. Enter a new
four-digit password, then press
the ENTER button.
Press the Cursor buttons (A or
T) to select RATING LEVEL, ..............................................................................
then press the ENTER button. ¢ ........... ....
[_ Press the Cursor buttons (A or _ _,;_ :_
T) to se ect a des red eve, then_
press the ENTER button. _ I_
Press the SETUP button to exit _ -_'_'
and activate the new settings. L............................ !?!ii ..................................................... .....
NOTE:
• This function may not work on some DVDs. Be sure if
the RATINGS operates in the way you have set.
To Change the Password:
1) Follow the steps H to U above.
2) Press the Cursor buttons (A or T) to select PASSWORD
CHANGE, then press the ENTER button.
3) Enter a new four-digit password, then press the ENTER
button.
4) Press the SETUP button to exit.
Others Setting _<
This function allows you to adjust Angle Icon availability, Auto
Power off, brightness of the Player's display panel and slide
show mode.
D Press the SETUP button in stop mode.
Press the Cursor buttons (_ or _) to select CUSTOM
then press ENTER.
• The custom mode will appear.
B Press the Cursor buttons (-_ or
_) to select Other, then press the
ENTER button to confirm.
D Press the Cursor buttons (_, or
_) to select an item, then press
ENTER.
ANGLE ICON (Default : ON)
• Press the ENTER button repeat-
edly to turn ON or OFR
_ ON
AUTO POWER OFF (Default : ON)
• Press the ENTER button repeat-
edly to turn ON or OFF.
• It will turn off the DVD player au-
tomatically after 30 minutes of no
USe.
\
/
_LEICOH ON
_ON
PANEL DISPLAY
(Default : BRIGHT)
• Press the Cursor buttons (& or
_) to select a setting (BRIGHT,
DIMMER and AUTO), then
press the ENTER button.
o When AUTO is selected, the dis-
play dims only during playback.
SLIDE SHOW (Default : 5sec)
• This adjusts the playback speed of
the JPEG SLIDE SHOW.
• Press the Cursor buttons (& or
"tr) to select between 5 sec and
10 sec, then press the ENTER
button.
_t Press the SETUP button to exit.
_I¢,i,
@@
q
I IF YOU FORGET THE PASSWORD
Press 4, 7, 3, 7 at step _][
• Password will be cleared and rating level will be set to
ALL.
_4_ Repeat steps _q_to _ to re-establish the parental
lock,
I CONTROL LEVELS
ALL
Parental lock is cancelled.
• Level 8
DVD software of any grade (adult/general/children) can
be played back.
o Levels 7 to 2
Only DVD software intended for general use and chil-
dren can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
] ,><,/Reset to the Default Settings
\(except for Ratings Control)
This allows you to return all selections of SETUP (except for
RATINGS) to their default settings.
Press the SETUP button in stop mode.
_C_Press the Cursor buttons (_ or _) to select
INITIALIZE, then press the ENTER button.
]
J _ Press the Cursor buttons (_, or _) to select YES,
then press the ENTER button.
L_ Press the SETUP button to exit.
NOTE:
o If you like to cancel initializing, select NO at step _kl
- 23 - EN