Display Setup; Other Setup - Denon DVD-A1UD Owner's Manual

ENGLISH

Display Setup

Set display-related items.
Setting items
Screen Saver Off : Do not use the screensaver.
Set the screensaver. On : The screensaver function activates when stop or pause status
continues for about three minutes.
Wallpaper Picture : Displays the DENON logo.
Black : Set the background to black.
Set to display the background
while playback is stopping. Gray : Set the background to gray.
Blue : Set the background to blue.
Still Mode Automatic : Display automatically using "Field" or "Frame" per the still
Set image quality during image information.
pause. Field : Set when there is a blurred image when "Automatic" image display
is set.
Frame : Set to display non moving images in high resolution.
Slide Show Time 3 ~ 5 ~ 100sec : This sets the display time per frame of a JPEG fi le during
Sets the display time of slideshow playback.
JPEG fi les.
Temporary Display Off : Do not temporarily display operations.
On : Temporarily display operations.
When the display is set to
"Off" by the Dimmer Control
(vpage 49) or Pure Direct
Function (vpage 40), this
sets it to temporarily display
operations received.
Captions Off : Do not output the closed caption (subtitle) signal.
On : Output the closed caption (subtitle) signal.
This setting output a subtitles
signal to a closed caption
decoder (sold separately).
Remote control operation
2 buttons
Default settings are underlined.
Setting contents
: Displaying the menu
Cancel the menu

Other Setup

Set other items.
Setting items
Auto Power Mode Off : Do not use auto power mode.
This setting automatically On : This setting automatically sets the power to standby if any of the
sets the power to standby. following states continues for approximately 30 minutes.
• Disc not loaded
• Playback has stopped
• Stopped due to resume function
Power Saving Power Saving Standby : This is the lowest power consumption mode.
Set power saving mode During standby, operations are not accepted via HDMI control or RS-
during standby. 232C.
Normal Standby : This is the low power consumption mode. During
standby, operations are accepted via RS-232C but not accepted by HDMI
control.
HDMI Control Mode : Setting for turning the power on using an external
device's HDMI control function or by operation via RS-232C. Slightly
higher power consumption.
Quick Start Mode : Start up time is faster but power consumption during
standby is higher.
Remote Control Setting
GRemote IDH
(Main unit side)
Switches the DVD-A1UD's remote control ID code when other DENON
Set the remote control.
BD Players are in the vicinity.
D ENON 1 : Set the switch in the remote control battery compartment to
•
"1" as well ("Remote Control Settings (Remote Control Side)" vpage
7).
D ENON 2 : Set the switch in the remote control battery compartment to
•
"2" as well ("Remote Control Settings (Remote Control Side)" vpage
7).
GReceive Legacy RemoconH
Set whether or not to accept remote control signals of a DENON DVD
player or other device.
• On : Accept
Off : Do not accept
•
BD Data Utility BD Data Erase : Erases both internal memory and SD Memory Card
Erases data on SD Memory storage.
Card, and initializes cards. Initialize SD Card : Initialize the SD card to be used for the Bonus View
function.
NOTE
• Insert or remove a SD Memory Card while the power is in standby.
If you insert a SD Memory Card while the power is ON, the SD Memory
Card may not be read.
• The SD card used for the Bonus View function must have a capacity of
1GB or greater. Also the SD card must be initialized on the DVD-A1UD.
• This operation will delete all the data. Do not perform this operation
when an SD card containing MP3 or JPEG data is inserted.
: Moves the cursor
:Decision the setting
(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
:Return to previous menu