Schwinn Journey 4.5 Elliptical Assembly Manual page 45

Condition/Problem
Drive train click/tick noise
once per full crank revolu-
tion
Squeaking noise that ap-
pears a few minutes into
a workout and normally will
get progressively worse as
the workout continues
Things to Check
Check crank/pulley as-
sembly
Check foot assemblies, leg
assemblies, handlebar
assemblies
Bolt that connects the
swing arms to the axle run-
ning through the console
mast
Disconnect left and right foot assemblies and rotate crank. If
sound persists, replace crank/pulley assembly. If sound does
not come from rotating crank, check foot assemblies and upper/
lower handlebars.
Manually move foot, leg, and handlebar assemblies to isolate
sound. Replace part making sound.
Loosen pivot rod bolt slightly until noise goes away. White lithium
grease can also be applied for a temporary fix. Contact Custom-
er Care for assistance.
Solution
45