Scan Function - Schwinn Airdyne Evolution Comp Owner's Manual

Display SCAN Function

The SCAN buttons will allow you to choose which information on each display
line you wish to view, OR, you can select the SCAN mode (when the SCAN icon
is displayed) and the display line information will automatically change (every
five seconds.)
For example, the Top Display Line shows TIME and distance (MILES or KM.) By
pressing the SCAN 1 button, the "scanning loop" on the Top Display Line looks
as follows...
Display
TIME (Press SCAN 1 button)
MILES (Press SCAN 1 button)
TIME SCAN 1 (Press SCAN 1 button)
TIME
Again, when the SCAN 1 Icon is shown (step 3), the information will
automatically change between TIME and MILES every five seconds.
When the computer is in the "home" mode, the Scan status of each Display Line
will carry over from one exercise to the next.
This allows you to set which specific bio feedback information is most important
to you, and that will become the default setting for your next workout.
14
etc.