Maintenance - Schwinn 420 Elliptical - 2010 Model Owner's Manual

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be replaced immediately or the equipment removed from
service until the repair is made. Only manufacturer supplied components can be used to maintain and repair the
equipment.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth
defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you would like
additional information, please refer to our Web site at www.nautilus.com/prop65
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning,
maintaining or repairing this machine.
Daily
Weekly
Before each use, inspect for loose, broken, damaged, or worn parts. Do not use the machine if any of these
conditions exist.
Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime. Clean the rails and
surface of the rollers with a damp cloth.
Make sure all bolts and screws are tight. Tighten if necessary.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Prevent getting too much moisture on
the Console.

Maintenance

16 16 16
Monthly