Front Face Leds - Sagem 1201 Reference Manual

All the
Windows® XP. These procedures in other Windows operating systems® (98, ME
and 2000) can be slightly different.
To help locate the fault, the user has the following sources:
States of Front Face LEDs,
Data accessible by the configurator by "DSL Router" onboard HTTP of your router:
•
supervision of the router,
•
"Diagnostics" tool.
A.2 Front Face LEDs
When the router is switched on, the "
green and gets off then the "
Status Colour
Green
Red
On steady
Blinking Green
Blinking Green
quickly
Blinking Green
slowly
Off
Sagem Communication document. Reproduction and disclosure prohibited
troubleshooting procedures
Power Synchronised
present ADSL line
Failure
detected at
the tim of
starting
x
X synchronisation
x connected
Power
_ not present
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Annex A - Troubleshooting
described
" LED (Internet) lights in
@
" LED (PWR) lights in green.
USB or ETH line
active
x x
x At LAN traffic rate
ADSL
x
training
Line not
USB or ETH line
x inactive
below are undertaken
@
Public Address
available
Unconnected line
or
Public Address
unavailable
At WAN traffic rate
x
Power
not present
or "Bridge" mode
Page A-3
in