Access Control; Services - Sagem 1201 Reference Manual

5 - Information / Configuration
5.10.3

Access Control

This menu contains the following three sub menus:
•
Services (cf. § 5.10.3.1),
• IP Address (cf. § 5.10.3.2),
•
Passwords (cf. § 5.10.3.3).
5.10.3.1

Services

Object: this sub menu is used to activate or deactivate Services such as FTP, FTPP etc.
• Select the Services
display the following screen:
The table displayed in the screen above indicates that the services listed such as FTP, HTTP,
ICMP, SSH and TELNET are all activated ("Enable" box checked) on the local network (LAN)
and deactivated ("Enable" box not checked) on the remote network (WAN).
Check the Enable box to activate the selected service on the local network (LAN) or on the
remote network (WAN).
Note: The ICMP service is always activated on the local network (LAN) and may be
activated or deactivated on the remote network (WAN).
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 5-70 Sagem Communication document. Reproduction and disclosure prohibited
sub menu in the Access Control menu of the Management section to