Diagnostics - Sagem 1201 Reference Manual

5.5.2

Diagnostics

Object: This menu is used to display all the tests performed on the connections made from
your router to your Internet Service Provider (ISP). These tests concern:
•
the connection to your local network (LAN),
•
the connection to your "DSL Service Provider",
•
Connection to your "Internet Service Provider".
A hypertext link (help) enables the user to access context-related help. This help
gives an explanation concerning the state of the connection
in orange and
The ADSL line translates the three statuses detailed in the table below.
State Colour
PASS Green
DOWN Orange
FAIL
If a test displays a "FAIL" state, click on "Help" and then the button
"Rerun Diagnostic Tests" at the bottom of the "Help" page, to check that the test
has been conclusive. If the test still displays "FAIL", you must follow the
troubleshooting procedure displayed on this page.
Sagem Communication document. Reproduction and disclosure prohibited
FAIL in red) and supplies the appropriate troubleshooting procedures.
Indicates that the test was completed successfully.
Indicates that an interface (ETH or USB) has not been detected.
Red Indicates that the test has failed, or that it is impossible to start a
command.
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
5 - Information / Configuration
(PASS in green,
Meaning
DOWN
Page 5-7