Part Identification Chart - Pro-Form 420 Zle Elliptical Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 Split
M4
Washer
Washer
(112)––8
(102)––8
M4 x 16mm
Blunt Screw
(104)––8
Hub Screw
(87)––8
M8 x 69mm Bolt (80)––1
M8 Split
Wave Washer
Washer
(111)––2
(90)––3
M4 x 16mm
Round Head
Screw (101)––10
M8 x 23mm Shoulder
Screw (115)––4
M10 x 80mm Carriage Bolt
M10 x 127mm Screw (83)––2
M8 Washer
(88)––6
M4 x 32mm
Round Head
Screw (105)––6
M8 x 23mm
Screw (84)––4
M8 x 80mm Bolt (116)––2
(82)––2
5
M8 Jam Nut M10 Locknut
(79)––7 (81)––2
M4 x 50mm Screw
(108)––2
M8 x 41mm
Bolt (78)––4