Pro-Form 420 Zle Elliptical Manual page 11

10. While a second person holds the Console (5)
near the Upright (3), connect the wires on the
Console to the Upper Wire Harness (48) and to
the Pulse Wires (118).
Insert the excess wire into the Upright (3) or into
the Console (5).
Tip: Avoid pinching the wires. Attach the
Console (5) to the Upright (3) with four M4 x
16mm Round Head Screws (101).
11. Attach the Upright Cap (4) to the Console
(5) with two M4 x 16mm Round Head Screws
(101).
10
3
101
Avoid
pinching
the wires
11
5
4
101
11
5
118
48