Achieving Powerful Sound At Low Volumes; Adjust - Adjusting The Speaker Level; Mode - Adjusting The Volume, Fader And Balance - Alpine DHA-S680P Owner's Manual

Digital Audio Processor (Optional)
ENT
ADJUST – Achieving powerful
sound at low volumes
NOTE
This setting is only possible with Dolby Digital outputs.
1
During playback, press the A.PROC button.
The setting menu appears.
2
Use the Joystick to select "ADJUST", then
press the ENT button.
3
Use the Joystick to select "LISTENING", then
press the ENT button.
4
Use the Joystick to select the mode.
L-NIGHT
For powerful sound at low volumes (to
compensate for high levels of background noise
such as road noise)
STANDARD
For more powerful sound at regular volumes
MAXIMUM
For the regular sound
NOTE
Press the RTN button to return to the previous screen.
38
-EN
5
ADJUST –
Adjusting the speaker level
1
2
A. PROC
BAND
3
DVD
Video CD
CD
4
5
6
7
8
MODE – Adjusting the
volume, fader and balance
Press the A.PROC button to close the digital
audio processor screen and return to the
playback screen.
During playback, press the A.PROC button.
The setting menu appears.
Use the Joystick to select "ADJUST", then
press the ENT button.
Press and hold the BAND button for at least 2
seconds to switch the "ADJUST" screen.
Use the Joystick to select "TEST TONE", then
press the ENT button.
Use the Joystick to select "ON", then press the
ENT button.
Test tones are produced for two seconds from
each speaker.
NOTE
Test tones are not produced from the center and rear
speakers when these speakers are set to "OFF".
Use the Joystick to select the speaker, then
press the ENT button.
Adjust so that the volume level from the different
speakers is the same.
Use the Joystick to adjust the level, then press
the ENT button.
NOTE
Press the RTN button to return to the previous screen.
Once the levels of all the speakers have been
adjusted, either set "TEST TONE" to "OFF" or press
the A.PROC button to close the digital audio
processor screen and return to the playback screen.
When a head unit is connected using Ai-NET
connections, adjust the volume, fader and
balance from the head unit.
DVD
Video CD
CD
DVD
Video CD
CD